Skip to content
Automotive

Field issues, explained across the vehicle. One case, every system.

We put a vehicle’s history back together, one event at a time.

An event cascade over time. The first change is usually the one that matters. Illustrative data.
What is hard here

The order of events.

A field issue reaches engineering without the software version or component lot that explains it. The teams that hold those records work in different tools.

What we have learned

Lining events up per vehicle matters more than any model on top. Once the order is right, the first change is usually the cause.

Agent Hive · Run 1906
Which other vehicles share the fault behind these warranty claims?
  1. Read64 claims · workshop notes1.1s
  2. JoinedDTC events, OTA installs, VIN build2.6s
  3. Delegatedsupplier lot check · 2 suppliers2.9s
  4. Comparedsoftware 4.2.1 against 4.1.80.9s
  5. Wrotecase with 2,140 vehicles at risk0.4s
Answer4 sources
2,140vehicles
Build 4.2.1 with sensor lot S-118

Claims concentrate on vehicles running 4.2.1 with sensors from lot S-118. Neither factor alone explains the rate.

warranty_claimsdtc_eventsota_installssupplier_lots
Ask a follow-up…
Illustrative data
Figures

One case across the vehicle.

Fig. 1 · Component test resultIllustrative data

Uniformity test result. Uniformity test of TB-3302 · tyre 17 on UF-03 (SOP-UNF-001; illustrative marks): Radial force variation 118 N (warn 75, limit 95), Lateral force variation 52 N (warn 55, limit 75), Radial run-out 0.88 mm (warn 0.75, limit 0.95). First harmonic 62 N peak to peak. Grade: hold. RFV above the limit on test and retest; blisters seen. Blisters with high force variation point to the cure. Next: hold · SOP-QA-001 · INV-20533.

Tyre
Harmonics against limits for the suspect component lot.
Fig. 2 · Supplier plant flowIllustrative data

Tyre plant layout and flow. Schematic tyre plant: mixing (MX-01, MX-02), extrusion and calendering (EXT-01, CAL-01, BW-01), tyre building (TBM-05 to TBM-07) and the green-tyre buffer, the curing hall with two rows of presses, final finish (X-ray XR-01, uniformity UF-03, balance BAL-02) and the high-bay store ASRS-1. One conveyor carries compound slabs, then components, then green tyres, then cured tyres. Tyre TB-3302 · tyre 17 is followed: Curing in T2-B08 · minute 7 of 13.

Where the component lot was built and cured.
Fig. 3 · Events on plant videoIllustrative data
Each event is timestamped and linked to the frames that show it.

Bring us one hard problem. We will say whether it fits our research.